Leading 10 usual forklift crashes ， forklift procedure must focus on these issues ！.

Leading 10 usual forklift crashes ， forklift procedure must focus on these issues ！.

Blog Article

Don't take too lightly the forklift at the office. If the procedure is not good, there will certainly be serious mishaps in minutes, and there are lots of crashes entailing forklifts.

Instance 1: The forklift freight obstructed the driver's sight, and the person ahead can not be located, causing a moving crash.
Instance 2: In order to keep the equilibrium of the forklift when raising heavy products, the workers used their body weight as the counterweight, which almost caused casualties.
Instance 3: The size of the forklift freight surpasses the permitted width of the course and holds on the roadside rack, which virtually creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Situation 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not notice the forklift.
Case 6: The forklift raises the employees illegally, the forklift chauffeur does not wear the safety belt, the forklift lifter falls and the driver is squashed when the forklift surrender.
Case 7: The forklift vehicle driver did not put on a safety belt and fell from the lorry when it surrendered and was crushed.
Forklift procedure must focus on these matters ：.

Beginning.
1. Before beginning, observe the surroundings, and after confirming that there are no barriers that hinder the safety and security of driving, beep the horn first and after that start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale should be secure before beginning.
3. When the forklift starts with a lots, the chauffeur should first confirm that the lots is stable and reliable.
4. The beginning must be sluggish and steady.

Driving.
1. When driving, the elevation in between the bottom end of the fork and the ground ought to be maintained 300mm-400mm, and the mast must be slanted backward. .
2. Do not raise the fork expensive when driving. When entering and leaving the work site or while driving, beware that there will certainly be no obstacles in the sky. When the lots is traveling, the fork should not be elevated too high, which will impact the security of the forklift. .
3. After unloading, the fork ought to be decreased to the regular driving position before driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to lose lateral stability and topple. .
5. When the forklift is downhill, it is purely prohibited to turn off the fire and slide, and it is restricted to brake suddenly while driving with lots unless there are special situations.
6. When the forklift is running, it needs to obey the traffic rules in the factory and have to keep a particular safety distance from the vehicle in front. .
7. When the forklift is running, the load should remain in the most affordable position that does not hinder the driving, and the gantry should be properly slanted back. The lots will not be increased except when stacking or packing. .
8. The elevation of the lots need to not block the driver's sight. In unique conditions, when the product influences the forward vision, drive at a reduced rate when turning around.
9. It is prohibited to turn on the ramp, neither to drive throughout the ramp. .
10. The secure driving rate of the forklift in the manufacturing facility area is 5 km/h, and it should drive safely at a reduced speed when entering the manufacturing workshop location. .
11. When the forklift is raised, lifted or driven, it is forbidden for employees to stand on the fork to hold things and play a balancing role. .
12. If troubles are located, they will certainly be fixed and reported in a prompt fashion, and they will certainly never ever operate with health problems or conceal them.

loading and unloading.
1. When fork-loading products, the range in between the two forks should be adjusted as required to make the tons of the two forks balanced and not skewed, and one side of the item ought to be against the shelf. .
2. It is restricted to deal with a single fork or use a fork top or pull. In special circumstances, safety and security indication should be established to remind bordering pedestrians. .
3. In the process of loading and discharging items, the forklift needs to be braked with the brake. .
4. The rate of the lorry should be sluggish and stable. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled objects and injure individuals. .
5. When making use of a fork to fork the goods, the fork should be as deep as feasible under the tons, and it needs to be noted that the fork pointer should not touch various other items or things. The tons needs to be maintained with minimal back tilt of the gantry to ensure that the lots does not move in reverse. The mast can be slanted forward somewhat when the load is reduced to permit simple positioning of the lots and extraction of the forks. .
6. It is restricted to fork goods at broadband and ram tough items with the fork head. .
7. When the forklift is functioning, it is restricted for people to loaf the fork, so as to prevent the collapse of the goods and harm individuals. .
8. Overloading is restricted, and it is banned to make use of forks to raise employees to participate in high-altitude procedures to prevent high-altitude falling accidents. .
9. It is not allowed to use the brake inertia to slide, place, round or roll items. .
10. It is not enabled to utilize forks to pick, turn pallet unload.

Leaving .
1. It Electric Forklift Truck for Warehouse is restricted to leave the forklift when the things on the fork impend. Before leaving the forklift, you should discharge the goods or reduced the fork frame.
2. Draw the hand brake manage to dead or depress the parking brake button.
3. The engine is shut off and the power is cut off. (Except for special conditions, such as the motorist does not leave the vehicle's line of sight and does not go beyond 1 minute).
4. Get rid of the secret. .

Forklift Operation Precautions.
1. Prior to and after the forklift operation, the appearance must be checked, and fuel, lubing oil and air conditioning water ought to be included.
2. Check the security efficiency of beginning, running and stopping.
3. Check whether the lights and horn signals are complete and efficient.
4. Throughout the procedure of the forklift, check whether the pressure and temperature level are regular.
5. After the forklift is running, the external leakage ought to additionally be examined and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You need to examine before leaving the car;.
2. When you experience someone before you throughout driving, you must send out a signal at a distance of 5 m;.
3. Stand-on Electric Pallet Stacker The driving rate in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be too sharp to prevent the propensity of "free switching";.
6. Running up and down the slope must be sluggish and uniform, and no turning on the slope is enabled.
7. Do not drive across the gradient. When the slope is higher than 10%, the automobile should be driven backwards when going downhill;.
8. When the forklift workers lug the goods and move on, if they encounter big or heavy items and go to the driver's view, they need to take the turning around workout
.
The "Eight Prohibitions" ought to be complied with in the operation.
1. Solitary fork procedure is not permitted.
2. It is not enabled to lift the goods for long distance driving.
3. It is not permitted to pick up the goods by turning over the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and various other dangerous chemicals with forks.
5. It is not permitted to make use of inertia force to pick up the goods.
6. It is not permitted to utilize stopping pressure to exile round or easy-to-roll items.
7. It is not enabled to bring individuals to deal with the pallet or fork, and it is strictly restricted to stand under the fork after the fork is raised.
8. Do not drive side to side on slopes
.
Vehicle parking is not permitted under the list below conditions.
1. Contours, narrow roadways, railway crossings;.
2. Areas with a longitudinal slope more than 5%.
3. When there is an challenge on one side of the roadway, the opposite side of the section with the very same length as the obstacle must be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844